Switching the Power ON / OFF
1. Press and hold the power button for two-seconds. The LCD display will turn on and
the bike will be ready to start.
2. To switch OFF, press and hold the power button for two-seconds.
Power Assist Level
The level of assist determines the motor’s input while pedalling. By default, there are
1-5 levels of power assist, 1 being the lowest, and 5 the highest. If you wish to ride with
no power assist, select 0."
Press the + (up) / - (down) button to select the level of power assist.
Throttle (Accelerator)
The throttle is enabled as soon as the LCD display is switched on. If you wish to switch off the throttle, select power assist level
“0”.
Switching ON / OFF the Headlight and Taillight
The Auto Light mode is turned ON by default. To turn ON / OFF the lights manually, hold the headlight button for one second.
Walk Mode
Press and hold the - (down) button to start the walking mode. This feature will operate the motor at a relatively low speed to
assist you in walking the bike.
To Next Page
Loading...
