Rize rx - Legal Requirements; E-bike Regulations and Safety Gear; Serial Number Importance

Data Mode Display
Press and hold the “i” button to change the data mode display. Press again to change to the next mode. The sequence:
Single Trip Distance > Total Distance > Maximum Speed > Average Speed > Remaining Distance > Energy Consumption
(Calories) > Time
Settings Mode
-
Double press “i” (mode) button to enter the settings mode.
-
Press + (up) or - (down) button to navigate through the settings options."
-
Press “i” (mode) button to select an option.
-
Press + (up) or - (down) buttons to make changes.
-
Press “i” (mode) button to go back.
1. Unit: speed unit in kilometer or miles
2. Brightness: display brightness
3. Auto Off: numbers of minutes to automatic switch power-off.
4. Default Mode: startup riding mode (ECO / Sport)
5. Power View: output display mode (Power / Current)
6. SOC View: battery level display mode (Percentage / Voltage)
7. Trip Reset: reset for single trip distance!
11
© 2021 Rize Bikes
8. Wheel: The wheel diameter
9. Speed Limit: (not applicable)
10. AL Sensitivity: light sensitivity
11. Factory Setting: reset to factory default
12. Password: boot password settings
13. Set Clock: time settings