RKC INSTRUMENT CB Series - Page 136

Temperature Controller MODBUS SIO Driver
GP-Pro EX Device/PLC Connection Manual
136
12A)
• 1:1 Connection
• 1:n Connection
GP-4106 (COM1) 12G
User-created cable
+
Connector cable from RKC Instrument Inc.
*5
W-BF-02
Cable length:
1200m or less
GP-4107 (COM1) 12H
User-created cable
+
Connector cable from RKC Instrument Inc.
*5
W-BF-02
*1 All GP3000 models except AGP-3302B
*2 All ST models except AST-3211A and AST-3302B
*3 All GP3000 models except GP-3200 and AGP-3302B
*4 Only the COM port which can communicate by RS-422/485 (2wire) can be used.
) IPC COM Port (page 7)
*5 To use multiple External Devices, utilize the W-BF-02 connector cable from RKC Instrument Inc.
• We recommend the TM4P-66P from HIROSE ELECTRIC CO., LTD. as the modular
connector.
• To use the External Device's COM.PORT, pair COM.PORT1 with COM.PORT2, and
COM.PORT3 with COM.PORT4.
Display
(Connection Port)
Cable Remarks
RDB
SDB
SG
FG
CA3-ADPCOM-01
CA3-ADPTRM-01
RDA
SDA
2
1
T/R(B)
T/R(A)
3SG
TRM
COM.PORT1
or COM.PORT3
modular connector
Display
Shield
Terminal block
External Device side
Signal name
Pin
Signal name
External
Device
User-created cable
Connect the terminating
resistor connector
W-BW-01 for Z-COM
to COM.PORT2
or COM.PORT4.
Display side
RDB
SDB
SG
FG
CA3-ADPCOM-01
CA3-ADPTRM-01
RDA
SDA
2
1
T/R(B)
T/R(A)
3SG
TRM
W-BF-02
COM.PORT2
or
COM.PORT4
COM.PORT1
or
COM.PORT3
COM.PORT1
or COM.PORT3
modular connector
Display
Shield
Terminal block
External Device side
Signal name
Pin
Signal name
External
Device
User-created cable
External
Device
Connect the terminating
resistor connector
W-BW-01 for Z-COM
to COM.PORT2
or COM.PORT4.
Display side