Need help?Do you have a question about the RKC INSTRUMENT RB100 and is the answer not in the manual?
General| Model | RB100 |
|---|---|
| Type | Temperature Controller |
| Input Type | Thermocouple, RTD |
| Output Type | Relay, Analog |
| Display Type | LED |
| Control Method | PID |
| Power Supply | 100-240V AC |
| Temperature Range | Depends on input type |
| Number of Control Outputs | 1 |
| Alarm Output | 1 |
| Communication | Optional |
Outlines the step-by-step process for configuring settings required for instrument operation after installation.
Provides essential warnings and environmental conditions for safe and proper instrument mounting.
Highlights critical precautions for safe and correct electrical wiring to prevent electric shock or instrument failure.
Guides through checking and setting input type, event, and control action parameters.
Explains how to set the control target value (SV) and event set values before operation.
Details precautions and steps before starting instrument operation, including parameter checks.
Explains how to transfer between control start (RUN) and stop (STOP) modes via keys or inputs.
Covers the function that automatically measures and sets optimum PID values for control.
Describes the function to automatically compute PID values based on system response characteristics.
Details the process of switching between automatic and manual control modes with bumpless function.
To Next Page
