General Description
Features
Process/Temperature Controller RB100/400/500/700/900
RB100
RB400
RB500
RB700
RB900
The RB Series is a high performance budget friendly temperature controller. Save space and save money with RB series that gives
outstanding control capability and comprehensive functions incorporated into a slim body case.
Applications include various plastic machines (extrudes, injection machine, etc), electric furnaces, semiconductor, food processing,
environmental chambers and many others.
Easy-to-read with large 11-segment LCD display
The depth of 60mm
Sampling 0.25 sec
Brilliant II PID control
Start-up tuning and Autotuniung
The RB Series has very short depth.
The series was designed with a mounting bracket that allows
close horizontal mounting of as many as six units.
.
Panel space saving : 60mm depth
So bright and so large it is easy to read from a greater
distance.
Timer Function
60mm
Thermocouple • RTD
DC voltage • DC current
* RB100 : 63mm depth
Easy-to-read with large 11-segment LCD display
15mm
10mm
SV1
SV2
SV3
SV4
RB400 PV display CB400 PV display
(SV)
Measured input
RB100 : 3 points
Measured value (PV) • Setting value (SV) •
Manipulated value (MV)
• The number of digital outputs is limited depending on the model and specifications.
• Analog Output is not available for some control types and models
• On the RB100, either communication or digital input can be selected.
RS-485
(ANSI/MODBUS protocol)
For heater break alarm
CT input 2 points
Loader communication
Communication
Digital input 2 points
SV selection • Mode selection
Digital output 4 points
Control output
Analog retransmission
output
Numerous inputs and outputs
Heat • Cool • Heat/Cool
SV1
SV2
SV3
SV4
SV1
SV2
SV3
SV4
Set value changeover is also possible by digital input.
Store up to 4 Set Values
SV changeover using digital input
Power ON or RUN
Ramp-to-setpoint
function
(PV start)
Digital input
Digital input
Digital input
SV
PV
Control starts after the timer time elapses.
SV
Control is performed during the timer time and stops after
the timer time elapses.
Timer time
Power ON
or RUN
Power ON
or RUN
Control
start
Control
Control
stop
Ramp-to-setpoint
function
(PV start)
1
RB_02E
To Next Page
Need help?
General
