RKC INSTRUMENT RB100 - Function Block 07 (F)

8. PARAMETER DESCRIPTION
IMR02C15-E4
8-77
Dummy
Function block 07 (F07)
This is the first parameter symbol of Function block 07 (F07).
F07
Heater break alarm 1 (HBA1) set value
Heater break alarm 2 (HBA2) set value
Link to the Heater break alarm 1 (HBA1) set value and Heater break alarm 2
(HBA2) set value in the Parameter setting mode.
For details of Heater break alarm 1 (HBA1) set value and Heater break
alarm 2 (HBA2) set value, refer to 8.4.2 Parameter setting item
(P. 8-31).
Related parameter
Parameter setting mode:
• Heater break alarm 1 (HBA1) set value (P. 8-31)
• Heater break alarm 2 (HBA2) set value (P. 8-31)
Engineering mode:
• CT ratio (P. 8-122)
• Number of HBA delay times (P. 8-123)
F07.
HBA1
HBA2