RKC INSTRUMENT RB100 User Manual

8. PARAMETER DESCRIPTION
IMR02C15-E4
8-66
Dummy
Function block 03 (F03)
This is the first parameter symbol of Function block 03 (F03).
F03
Setting change rate limiter (up)
Setting change rate limiter (down)
Link to the Setting change rate limiter in Parameter setting mode.
For details of Setting change rate limiter (up) and Setting change rate
limiter (down), refer to 8.4.2 Parameter setting item (P. 8-18).
Related parameter
Parameter setting mode:
• Set value 1 (SV1), Set value 2 (SV2), Set value 3 (SV3), and
Set value 4 (SV4) (P. 8-13)
• SV selection (P. 8-14)
• Timer 1, Timer 2, Timer 3, and Timer 4 (P. 8-15)
• Timer function (P. 8-16)
• Repeat execution times (P. 8-17)
• Setting change rate limiter (up), Setting change rate limiter (down) (P. 8-18)
Engineering mode:
• Set value 1 (SV1), Set value 2 (SV2), Set value 3 (SV3), and
Set value 4 (SV4) (P. 8-60)
• SV selection (P. 8-61)
• Timer 1, Timer 2, Timer 3, and Timer 4 (P. 8-63)
• Timer function (P. 8-64)
• Repeat execution times (P. 8-64)
F03.
SVRU
SVRd

RKC INSTRUMENT RB100 Specifications

General

Brand	RKC INSTRUMENT
Model	RB100
Category	Temperature Controller
Language	English