RKC INSTRUMENT RB100 - Function Block 08 (F); Minimum On;Off Time of Proportioning Cycle [Heat-Side

8. PARAMETER DESCRIPTION
IMR02C15-E4
8-80
Dummy
Function block 08 (F08)
This is the first parameter symbol of Function block 08 (F08).
F08
Proportional cycle time [heat-side]
Link to the Proportional cycle time [heat-side] in the Parameter setting mode.
For details of Proportional cycle time [heat-side], refer to
8.4.2 Parameter setting item (P. 8-36).
Related parameter
Parameter setting mode:
• Proportional cycle time [heat-side] (P. 8-36)
• Minimum ON/OFF time of proportioning cycle [heat-side] (P. 8-37)
Engineering mode:
• Minimum ON/OFF time of proportioning cycle [heat-side] (P. 8-80)
• Time setting of proportional cycle time [heat-side] (P. 8-129)
F08
Minimum ON/OFF time of proportioning cycle [heat-side]
Link to the Minimum ON/OFF time of proportioning cycle [heat-side] in the
Parameter setting mode.
For details of Minimum ON/OFF time of proportioning cycle [heat-side],
refer to 8.4.2 Parameter setting item (P. 8-37).
Related parameter
Parameter setting mode:
• Proportional cycle time [heat-side] (P. 8-36)
• Minimum ON/OFF time of proportioning cycle [heat-side] (P. 8-37)
Engineering mode:
• Proportional cycle time [heat-side] (P. 8-80)
• Time setting of proportional cycle time [heat-side] (P. 8-129)
F08.
MT
T