RKC INSTRUMENT RB100 - Page 205

8. PARAMETER DESCRIPTION
IMR02C15-E4
8-81
Dummy
F08
Output limiter high [Heat-side output limiter (high)]
Output limiter low [Cool-side output limiter (high)]
Link to the Output limiter high and Output limiter low in the Parameter setting
mode.
For details of Output limiter high and Output limiter low, refer to
8.4.2 Parameter setting item (P. 8-38).
Related parameter
Parameter setting mode:
• Output limiter high [Heat-side output limiter (high)] (P. 8-38)
• Output limiter low [Cool-side output limiter (high)] (P. 8-38)
F08
Proportional cycle time [cool-side]
Link to the Proportional cycle time [cool-side] in the Parameter setting mode.
For details of Proportional cycle time [cool-side], refer to
8.4.2 Parameter setting item (P. 8-39).
Related parameter
Parameter setting mode:
• Proportional cycle time [cool-side] (P. 8-39)
• Minimum ON/OFF time of proportioning cycle [cool-side] (P. 8-40)
Engineering mode:
• Minimum ON/OFF time of proportioning cycle [cool-side] (P. 8-82)
• Time setting of proportional cycle time [cool-side] (P. 8-129)
OLH
OLL
t