Temperature Controller MODBUS SIO Driver
GP-Pro EX Device/PLC Connection Manual
144
6 Supported Device
Range of supported device address is shown in the table below. Please note that the actually supported range of
the devices varies depending on the External Device to be used. Please check the actual range in the manual of
your External Device.
Enter the External Device address in the dialog below.
1. Address Enter the address.
2. Reference Available parameter list ([Reference To Parameter] dialog box) is
displayed.
Click the parameter to use and press “Select”, then the address is
entered.
3.Channel No. Enter the channel No. to be displayed on the list.
[ channel No.] is displayed when “SRZ (Z-COM) ” of the series of the
external device is selected.
• When [Set as Default Value] is selected, the value displays as the default when entering a new
address.
2
3
1
To Next Page
Loading...
