Temperature Controller MODBUS SIO Driver
GP-Pro EX Device/PLC Connection Manual
71
Device Setting
To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific
Settings ] of [Device/PLC Settings ].
When you connect multiple External Device, click from [Device-Specific Settings] of [ Device/PLC
Settings] to add another External Device.
Wait To Send
Use an integer from 0 to 255 to enter standby time (ms) for the Display from receiving packets
to transmitting next commands.
RI/VCC
Switches RI/VCC of the 9th pin.
It is necessary to change RI/5V by changeover switch of IPC when connect with IPC.
Please refer to the manual of the IPC for more detail.
Setup Items Setup Description
Series Select a model of the External Device.
Slave Address Enter the Slave Address of the External Device.
Setup Items Setup Description
To Next Page
Loading...
