RKI Instruments M2A - Page 75

M2A Transmitter Operator’s Manual 75
81-1050RK Regulator, with gauge and knob, 0.5 LPM, for 17 liter and 34 liter steel calibration cylinders (cylinders
with external threads)
81-1051RK Regulator, with gauge and knob, 0.5 LPM, for 34 liter aluminum/58 liter/103 liter calibration cylinders
(cylinders with internal threads)
81-1051RK-25 Regulator, fixed flow, w/gauge & knob, 0.25 LPM, for 34 liter aluminum/58 liter/103 liter cylinders
(Used to calibrate NH
3
ESM-01 M2A only)
81-1103RK Calibration cup, for 3/4 NPT IR detectors
81-1117RK Calibration cup, for catalytic LEL/ppm, CO, H
2
S, replaceable-sensor-type IR, CT-7 Series, and
oxygen detectors
81-1138RK Calibration cup, general (SO
2
), for all ESM-01 except Cl
2
and NH
3
, use 0.5 LPM flow
81-1138RK-CL2 Calibration cup, for ESM-01 Cl
2
, use 0.5 LPM flow
81-1138RK-NH3 Calibration cup, for ESM-01 NH
3
, use 0.25 LPM flow
81-1190RK Splashguard, for ESM-01 detector cap
81-9029RK-02 Calibration cylinder, 100 ppm NH
3
in nitrogen, 58 liter
ES-1531-CO CO sensor, plug-in (for 65-2438, 65-2438-01, and 65-2496RK detectors)
ES-1537-H2S H
2
S sensor, plug-in (for 65-2428, 65-2428-02, and 65-2495RK detectors)
ESM-015-NO ESM-01 plug-in sensor, 0 - 100 ppm nitric oxide
ESM-01DH-ASH3 ESM-01 plug-in sensor, 0 - 1.50 ppm arsine
ESM-01DH-D-HCN ESM-01 plug-in sensor, 0 - 15.0 ppm hydrogen cyanide
ESM-01DH-D-SO2 ESM-01 plug-in sensor, 0 - 6.00 ppm sulphur dioxide
ESM-0DH-PH3 ESM-01 plug-in sensor, 0 - 1.00 ppm phosphine
ESM-01R-D-NH3 ESM-01 plug-in sensor, 0 - 75.0 ppm ammonia
ESM-K01-D-CL2 ESM-01 plug-in sensor, 0 - 3.00 ppm chlorine
ESM-K01D-CL2-10 ESM-01 plug-in sensor, 0 - 10.0 ppm chlorine
NC-6205-01 Hydrogen specific LEL detector, catalytic type, UL version
NC-6205-05 Hydrogen specific LEL detector, catalytic type, CSA version
Table 20: Parts List
Part Number Description
w ww. . com
information@itm.com1.800.561.8187