RKM MK902S - PPPOE Setting; Usb; Sound; Display

RKM MK902S User Manual
Page
8
Notice:
Some equipment, for example, Bluetooth headset maybe have a fixed password (like 000), then
you must input corresponding password.
4.5 PPPOE Setting
If the network need dial-up, then click PPPOE Settings and input account and password.
Click “Setting

“More”

“PPPOE Settings”

input account and password.
4.6 USB
For exchange data between the MK902S and PC.
Operate steps：
Equipment connection: Connect with computer through USB cable, please note you MUST plug
into USB Slave port of the MK902S, which is for computer connecting.
4.7 Sound
This is for Sound settings;
Volume: Control volume level;
Operate prompt tone: Setting prompt tone during operating;
Screen saver sound: Setting screen saver sound.
4.8 Display
Font size: Setting font size according to your favorite.
4.9 Screen
This is for Screen settings:
1. Screen ratio: Used for adjusting screen ratio.
2. Output Interface: Default HDMI
3. HDMI mode: User can setting corresponding output resolution according to the TV.
Normally system will auto detective.