EasyManua.ls Logo

RKS CD15 - Charging of Battery; Instructions

RKS CD15
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
Batteries and dry batteries should not be thrown in non-dedicated
garbage bins.
Batteries should not be exposed to water or placed in water.
Avoid battery complete discharging (excessive or deep discharge),
otherwise it will damage the battery life cycle (this is not within the
scope of quality assurance).
Charge after each use and if the e-bike is not in use, charge the
battery for at least four hours every month
Chargng of battery
The e-Bike is equipped with lithium battery to power the motor of 36v match. Compared
to other batteries, lithium battery has no "memory effect" and can be recharged even if
the charge is not completely exhausted.
After several times of charging and discharging, the battery can achieve the best
performance. It is better to charge fully for the first time. The charger will turn off
automatically when the light of charger turns red to green as an indication of full charge.
Instructions
Firstly, connected the charger with the battery. The charging port of lithium
battery is located behind and below the battery cases' base, which is assembled
with IP 67 water-proof cover and dust proof sealant.
Insert the charger pin into power socket.
During charging, the charging indicator of the charger is red, indicating that
charging is in progress; when the charging indicator of the charger changes from
red to green, the battery is fully charged.
After charging, please unplug the charger from power socket first and then unplug
the charger from the battery.
If the LED light does not turn on red, it is due to overheating of the
battery, and the
battery need to be cooled for a period of time before charging.

Related product manuals