06
LCD Functions description
1. Display function - Speed display, power level display, power indicator, failure
warning, total mileage, single mileage, headlight display, single driving time display.
2.Control, setting up functions - Power switch control, headlight switch control, 6Km/h
point control, wheel diameter setting, maximum speed setting, idle automatic
hibernation time setting, backlight brightness setting, voltage level setting
3. ：UARTCommunication protocol
All the contents of the display screen (full display in boot 1S)
Content Introduction
3.1 Headlight - The instrument can be manually turned on and the brightness of the
sensing environment is automatically turned on (light sensitivity support required for
this function).
3.2 BATTERY Power Display
To Next Page
Loading...
