RKS TNT-5 - User Manual

45 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

TNT-5

USER MANUAL

www.rksmotor.eu

Table of Contents

Questions and Answers

S
stacyrodriguezAug 8, 2025
Why RKS TNT-5 Bicycle motor doesn't work after switching on?
- P
  Patty LeeAug 8, 2025
  If your RKS Bicycle motor isn't providing assistance after being switched on, several factors could be the cause. It might be due to a loose motor cable waterproof connection joint; ensure it is securely fixed. Alternatively, the brake lever may not be fully returning, which cuts off power; make sure it returns to its normal position. A broken battery fuse could also be the culprit; inspect the fuse located under the battery pack top handle. If these steps don't resolve the issue, it is recommended to contact your vendor or an authorized service.
S
Samuel ZunigaAug 15, 2025
What to do if RKS TNT-5 Bicycle motor doesn't assist after turning on?
- S
  Samantha BlakeAug 15, 2025
  If your RKS Bicycle motor isn't providing assistance after being switched on, consider these potential causes. Insufficient charging time could be the reason; ensure the battery is charged according to the instructions in Chapter 3.3. Low environmental temperature may also affect battery performance; storing the battery indoors, especially in winter or below 0°C, is advisable. Furthermore, riding conditions such as frequent uphill climbs, headwinds, or poor road conditions can impact motor assistance; this should normalize with improved conditions. Lastly, check tire inflation, making sure they are fully inflated to 45psi.
D
Dean BurnettAug 23, 2025
How to fix RKS TNT-5 Bicycle motor not assisting after power on?
- A
  averynicholasAug 23, 2025
  If your RKS Bicycle motor isn't providing assistance after being switched on, check the motor cable waterproof connection to ensure it's tightly secured. Also, verify that the brake lever returns to its normal, non-braking position. If the issue persists, inspect the battery fuse for any breaks. If the fuse is broken, you should contact your dealer or authorized service to replace it.
D
davisjuliaAug 30, 2025
Why RKS TNT-5 motor is not working after main battery switching on?
- R
  Rebecca HowellAug 30, 2025
  There are several reasons why the motor on your RKS Bicycle might not be providing assistance after switching on the main battery. One potential cause is insufficient charging time. Make sure to charge the battery according to the instructions. Another factor could be low environmental temperature affecting the battery's performance. In cold conditions, storing the battery indoors is recommended. Additionally, challenging riding conditions such as steep slopes or poor roads can impact motor assistance. If these conditions improve, the motor should function normally. Finally, check the tire inflation; make sure the tires are inflated to 45psi.

Summary

MANUAL FOR MECHANICAL PARTS

Conditions for Riding This Electric Bicycles

Specifies riding surface, load limits, and warnings for safe operation.

Selection and Set-up

Covers selecting the bike and adjusting saddle and handlebars for optimal fit.

Safe Cycling and Safety Tips

Details essential pre-ride checks and safe riding behaviors.

Routine Maintenance Check and Lubrication

Outlines regular maintenance, lubrication schedule, and component wear advice.

Assembly Instructions

Step-by-step guide for assembling the electric bicycle.

MANUAL FOR ELECTRIC PARTS

Important Safety Cautions

Highlights crucial safety measures, including helmet use and obeying road rules.

Operation

Explains how to operate the electric bicycle and its key features.

Checking Before Riding

Details checks for tires, battery charging, and chain before riding.

Switching on the battery

Instructions on turning on the battery and the steps for charging.

Functions of the display

Explains the control panel buttons and the functionality of the display screen.

Advantages of a Lithium Battery

Lists the benefits of the lithium battery, such as no memory effect and long life.

Procedure for Charging

Provides a step-by-step guide for safely charging the electric bike battery.

Using and Maintaining the Electric Hub Motor

Guidance on operating and caring for the electric hub motor to prevent damage.

Using and Maintaining the Battery Charger

Instructions for proper use and care of the battery charger for longevity.

Maintaining the Controller

Advice on protecting and maintaining the electronic controller from damage.

Simple Trouble shooting

Provides solutions for common problems encountered with the electric bike.

Diagram and Specification

Includes electrical circuit diagrams and key technical specifications of the bike.

MAIN TECHNICAL SPECIFICATION SHEET

General Data for Electric Bikes

Key specifications including maximum speed, and protection values.

Bike Motor Specifications

Details motor type, rated power, maximum output power, and rated voltage.

Battery and Charger Specifications

Information on battery type, voltage, capacity, and charger details.

Purchase Record Card

Record Your Purchase Details

Fields to fill out for recording purchase details and warranty claims.

RKS TNT-5 Specifications

General

Brand	RKS
Model	TNT-5
Category	Bicycle
Language	English

Related product manuals

Preview: RKS TNT-15

Preview: RKS T7

Preview: RKS MX25

Preview: RKS MC3

Preview: RKS GF Series

Preview: RKS MB6