EasyManua.ls Logo

RME Audio Fireface 400 - MIDI; Digital; Digital Inputs

RME Audio Fireface 400
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
90
User's Guide Fireface 400 © RME
DA – Phones, 7/8, front
as DA, but:
Output: 6.3 mm TRS jack, unbalanced
Output impedance: 30 Ohm
36.2 MIDI
2 x MIDI I/O breakout cable with 4 x 5-pin DIN jacks
Galvanically isolated by optocoupled input
Hi-speed mode: Jitter and response time typically below 1 ms
Separate 128 byte FIFOs for input and output
36.3 Digital
Clocks: Internal, ADAT In, SPDIF In, word clock in. Optional LTC/Video in
Low Jitter Design: < 1 ns in PLL mode, all inputs
Internal clock: 800 ps Jitter, Random Spread Spectrum
Jitter suppression of external clocks: > 30 dB (2.4 kHz)
Effective clock jitter influence on AD and DA conversion: near zero
PLL ensures zero dropout, even at more than 100 ns jitter
Digital Bitclock PLL for trouble-free varispeed ADAT operation
Supported sample rates: 28 kHz up to 200 kHz
36.4 Digital Inputs
AES/EBU - SPDIF
1 x RCA, transformer-balanced, galvanically isolated, according to AES3-1992
High-sensitivity input stage (< 0.3 Vpp)
SPDIF compatible (IEC 60958)
Accepts Consumer and Professional format, copy protection will be ignored
Lock Range: 27 kHz – 200 kHz
Jitter when synced to input signal: < 1 ns
Jitter suppression: > 30 dB (2.4 kHz)
ADAT Optical
1 x TOSLINK
Standard: 8 channels 24 bit, up to 48 kHz
Sample Split (S/MUX): 8 channels 24 bit / 48 kHz, equalling 4 channels 24 bit 96 kHz
Bitclock PLL ensures perfect synchronisation even in varispeed operation
Lock Range: 31.5 kHz – 50 kHz
Jitter when synced to input signal: < 1 ns
Jitter suppression: > 30 dB (2.4 kHz)
Word Clock
BNC, not terminated (10 kOhm)
Switch for internal termination 75 Ohm
Automatic Double/Quad Speed detection and internal conversion to Single Speed
SteadyClock guarantees super low jitter synchronization even in varispeed operation
Not affected by DC-offsets within the network
Signal Adaptation Circuit: signal refresh through auto-center and hysteresis
Overvoltage protection
Level range: 1.0 Vpp – 5.6 Vpp
Lock Range: 27 kHz – 200 kHz
Jitter when synced to input signal: < 1 ns
Jitter suppression: > 30 dB (2.4 kHz)

Table of Contents

Related product manuals