ǏNoteǐIf you bring the unit from one place to another place, please boot until it
adapts to the environment. Big humidity fluctuation will make the mainframe short
circuited.
3.2.2 Power off
Press the button on the top of the unit to turn off, the unit will enter the power
saving mode and maintain the last operation status when boot next time.
3.3 Reset system
If the system cannot work, you can reset the system by the following way:
Click the reset key on the right part of the machine to reset the system by using the
stylus.
Ǐrelative informationǐ˖it can be no response in the following condition:
1. The shift between pictures is delayed or stopped.
2. The program select function cannot work normally, such as long time to carry out
or cannot be activated.
3. The power button can not work
ǏNoteǐThe unsaved data will be lost as you reset the system when the system has no
response. Please copy the data every other time.
3.4 Use bracket to fix navigator
When use GPS navigator in the car, you should fix the device to the part of window
besides the panel by using the bracket.
To Next Page