08 09
Using Your DashCam
As a driver, you have full responsibility to drive safely and adhere
to all applicable trac regulations.
Record Videos
When connected to a car charger, DashCam automatically
starts recording, REC is displayed and red dot flashes on the
screen, the current recording duration is displayed, and the
current date and time is displayed.
To enable / disable the audio recording, press (Mute/
Unmute).
Protect the Current Recording
By default, DashCam uses a sensor to automatically detect
accidental collisions and protect the video file with duration of 30
seconds. This indicates that those recordings have been locked and
will not be overwritten by new video clips.
To protect the current recording manually, press (Emer).
Playback Videos
The DashCam stops recording while viewing videos or settings.
Select “Normal” folder to check saved videos. Select “Event”
folder to check the videos of accidental collisions.
Select a video to playback.
Button Virtual Button Function
Play / Pause
Fast forward
Delete Current / Delete All
Back to previous menu
To Next Page
Loading...
