Do you have a question about the Roav R2130 and is the answer not in the manual?
Brand | Roav |
---|---|
Model | R2130 |
Category | Dash Cameras |
Language | English |
Instructions for inserting and formatting a microSD/TF card for the dashcam.
Connects the dashcam to the car's power source via the car charger.
Connects the dashcam to the vehicle's OBD port for continuous power.
Details on dual recording modes and how to start/stop recording.
Explains automatic collision detection and manual recording protection.
Steps to access and play recorded videos directly on the dashcam.
Instructions for using the separate PC software to view videos.
Set the desired video resolution for the dashcam recordings.
Configure the duration of each recording video clip.
Choose the source for the dashcam's LCD display.
Set the screen backlight to turn off after a period of inactivity.
Enable or disable audio recording on the dashcam.
Mute or unmute the dashcam's operational sounds.
Enable or disable voice prompts for dashcam operations.
Configure sensitivity for automatic video recording during collisions.
Choose the recording mode, such as loop or emergency recording.
Control the infrared light for low-light interior recording.
Set the GPS functionality to On or Off.
Set the duration for fatigue driving alerts.
Set the on-screen menu language for the dashcam.
Match the video frequency to your location's electrical frequency.
Set the correct time zone for accurate timestamps.
Configure power supply options, including parking surveillance.
Display or hide the date and time on recordings.
Set and adjust the date and time for the dashcam.
Reset all dashcam settings to their default values.
Format the memory card, erasing all data.
View the current version number of the dashcam's firmware.
Troubleshooting steps if the dashcam fails to record footage.
Solutions for a blurred or unclear image from the dashcam.
Steps to power off the dashcam if it becomes unresponsive.
Troubleshooting a blank or black screen on the dashcam.
Explanation of how continuous loop recording handles a full memory card.