Roav R2130 - System Setup; Resolution; Loop recording; LCD display mode

12 English English 13
System Setup
To adjust DashCam Duo’s settings, press .
Menu Options Description
Available Options
Resolution Set a desired video
resolution.
• 1080p + 1080p @30fps
• 1080p + 720p @30fps
• 720p + 1080p @30fps
• 720p + 720p @30fps
Loop recording Set the duration of each
recording video clip.
• 1 minute
• 3 minutes
• 5 minutes
• 10 minutes
LCD display
mode
Choose the LCD display
source.
• Front Camera
• Back Camera
• PIP Front Full
• PIP Behind Full
LCD auto o Turn o the screen
backlight after a period
of inactivity. Recording
continues.
• 30 Seconds
• 60 Seconds
• O
Sound
recording
Enable or disable sound
recording.
• On
• O
Machine sound Mute or unmute. • On
• O
Menu Options Description
Available Options
Voice prompt Enable or disable voice
prompt.
• On
• O
Driving
collision
detection
If a collision is detected
while driving, DashCam
Duo will record a
30-second video clip.
• Low
• Medium
• High
• O
Record files Choose the recording
mode.
• Loop recording
• Emergency recording
Infrared light The infrared light
automatically turns on
in low-light conditions.
If the light is on, the
video footage of the
interior will be in black
and white.
• On
• O
• Auto On
GPS Set GPS to On / O. • On
• O
Fatigue driving
alert
Set the duration to send
fatigue driving alert.
• 1 hour
• 2 hours
• 4 hours
• O
Language Set the on-screen menu
language.
• English
• Japanese
• Chinese