EasyManua.ls Logo

Robam CS46-W270 - Hob Technologies and Usage; Ceramic vs. Induction Cooking; Initial Setup and Touch Controls

Robam CS46-W270
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
A Word on Ceramic Cooking
•Ceramic hob cooking is based on infrared heating technology, the nickel chrome wires of
the hob would radiate heat and give out the infrared to warm up the food. The ceramic
cooker hob centers on customers and adopts personalized design. The hob has safe and
reliable performances, making your life comfortable and enabling to fully enjoy the pleasure
from life.
•Ceramic hobs do not pick pot. You can use any kind of pot or pan, such as copper pots,
wok, stainless steel, cookware, glass pot, casserole and ceramic pot.
A Word on Induction Cooking
Induction cooking is a safe, advanced, efficient, and economical cooking technology. It
works by electromagnetic vibrations generating heat directly in the pan, rather than indirectly
through heating the glass surface. The glass becomes hot only because the pan eventually
warms it up.
Before using your New Induction Hob
Read this guide, taking special note of the ‘Safety Warnings section.
Remove any protective film that may still be on your Induction hob.
Using the Touch Controls
The controls respond to touch, so you don’t need to apply any pressure.
Use the ball of your finger, not its tip.
iron pot
magnetic circuit
ceramic glass plate
induction coil
induced currents

Related product manuals