What to do if my Robam cd28-w985 Hob displays the error code E1?
If your Robam Hob shows the E1 error code, try these steps: 1. Ensure the pan is correctly positioned. If necessary, use appropriate cookware. 2. Wait a moment to allow the temperature to return to normal. When the power supply voltage is normal, the hob should automatically resume operation.
Why does my Robam cd28-w985 stop heating during use?
Your Robam Hob might stop heating for several reasons: * The surrounding temperature may be too high. * The intake or exhaust ports may be blocked. * The set time may have elapsed. * The protection device may be activated. In this case, wait a few minutes before turning the power back on. * The hob automatically shuts off if there is no operation within 2 hours.
What to do if the indicator light is on but my Robam Hob isn't heating?
If the indicator light is on, but your Robam Hob isn't heating, check the following: * Ensure you are using an appropriate pot. * Verify that the hob is not in reservation mode. If these steps don't resolve the issue, it is recommended to send the hob to authorized repair outlets.
Why can't I control the temperature on my Robam cd28-w985 Hob during fixed temperature cooking?
If you cannot control the temperature on your Robam Hob while using the fixed temperature setting, it could be due to: * The bottom of the pot not being flat or the center being sunken. * The indicator light for the temperature setting being off.
General| Number of Gas Burners | 2 |
|---|---|
| Product Type | Gas Hob |
| Model Number | CD28-W985 |
| Brand | Robam |
| Gas Type | Natural Gas/LPG |
| Weight | 15 kg |
| Appliance Type | Hob |
| Dimensions | 150mm (H) |
Explains the power key, lock function, and reservation for turning off.
Details setting the timing shutdown function for automatic operation.
Covers turning on, activating functions, and controlling heating.
To Next Page
