Cleaning and Maintenance
●Please cut off the wire before clean the multifunction hob, and the clean should be done after
panel cooling.
●Don t pull down the plug directly under working state. The multifunction hob should be turned
off firstly, then pull down the plug after fan stop working. It’ s helpful to prolong the life of
product.
’
The method of clean the multifunction hobs
Body of product and control panel:
If the panel is dirty, please clean it by wet wiper, if the oil is hard to clean, please clean it by
neutral cleanser firstly, and then clean it by soft wiper.
Panel:
If the panel is dirty, please clean it by wet wiper, if the oil is hard to clean, please clean it by
neutral cleanser firstly, and then clean it by soft wiper.
Inlet and our let row surface:
Clean the dust by cotton stick. if there is some oil, users can clean it by brush with little neutral
cleanser.
1.Don’ t clean the machine body, inlet row and outlet row by organic solution, like oil or
benzene. Please clean the machine body, inlet and outlet row by soft brush or cleaner
regularly, if the dust is too much in the inlet row, it may shorten the life of multifunction hob.
2.Push cut off the wire every time after using the multifunction hob ,wait some moments until
the panel is cooling.Then clean the multifunction hob in time .If the smudginess is heated
by the bottom of pan again and again ,it will be hard to clean and make panel change color.
3.Don’t allow to clean this product by steam cleansers.
4.If the surface appear crack, please turn off the multifunction hob and stock working
immediately. It may cause electric shock.
Remarks
Accessories
1.One instruction book One carton board fro explanation the dimensions of cut out area 2.
Statement
If there is anything improvement on the technology, we will make it up in the new manual
without special notice. The modification of appearance or color must be confirmed on base of
actual object
10
Multifunction Hob
To Next Page
Loading...
