Robam CS46-W270 - Using the Timer; Setting Timer for One Zone

19
Using the Timer
• You can set the timer up to 99 minutes.
Setting the timer to turn one cooking zone off
Cooking zones set for this feature will:
1. Touch the heating zone selection control that you want to set the timer for.
(e.g. zone 1#)
2. Touch timer control, the minder indicator will start flashing and “00”
will show in the timer display.
3. Set the time by touching the “-“ or “+” control.
Hint: Touch the “-“ or “+” control once will decrease or increase by 1 minute.
Touch and hold the ”-“ or “+” control will decrease or increase by 10 minutes.
4. Touch the “-“ control, if the “00” will show in the minute display, the timer is cancelled.
5. When the time is set, it will begin to count down immediately. The
display will show the remaining time and the timer indicator flash for 5
seconds.
NOTE: The red dot next to power level indicator will illuminate
indicating that zone is selected.
6. When cooking timer expires, the corresponding cooking zone will be
switch off automatically.