PACKAGING
All care is taken when packing and Roband ensures that every unit is functional
and undamaged at the time of packaging.
The Package of this Boiling Water Unit should include:
1. One Boiling Water Unit (appropriate model)
2. This Manual
Any damage to the machine as a result of freight must be reported to the Freight
Company and to the agent responsible for the despatch of said unit within 24 hours
of receipt. No claims will be accepted or entertained after this period.
To prevent damage during transport, the tap is packed inside the unit housing. For
the AR3, AR5 and AR10 units, remove the four screws located on the top and
bottom of the unit and slide the housing toward you. For AR15, AR25 and AR40
models, unscrew and remove the access panel on the left hand side of the unit.
C-Tick:
Robatherm
products have been designed and manufactured to comply with any and
all specifications set out by the Australian Communications Authority (ACA) in
regards to Electromagnetic Compatibility. As testament to such compliance these
units bear the C-Tick symbol.
For further information contact the Australian Communications Authority, PO Box
13112, Law Courts, Melbourne VIC 8010.
To Next Page
Loading...