Page: 9
STAGED COOKING
The microwave can cook in sequences of up to 3 Time / Power settings which
run sequentially without further input from the user. The display will show the
total time while cooking.
Stage 1:
1) Open the door and insert food in the oven. Close the door. “Ready” will
display.
2) Set cooking time by pressing ‘Time Entry’ then enter cooking time using
the numeral keypad
3) Select desired power by pressing ‘Hold-0%’, ‘Defrost – 20%’, Medium-
50%’ or ‘MED-Hi- 70%’ (skip this step for 100% power).
Stage 2 & 3:
4) Press ‘Time Entry’ again and “STAGE-2” is displayed. enter desired
cooking time for Stage 2
5) Select desired power by pressing ‘Hold-0%’, ‘Defrost – 20%’, Medium-
50%’ or ‘MED-Hi- 70%’ (skip this step for 100% power)
6) Repeat Steps 4) and 5) if Stage 3 is required
7) Press ‘Start’ to begin cooking or ‘Stop’ to cancel programming. Display
will show total time and run through the stages automatically.
8) Cooking can be paused by pressing ‘Stop’ once. Pressing ‘Stop’ while
paused will clear remaining time. To resume cooking while paused, press
‘Start’.
To Next Page
Loading...