Do you have a question about the robatherm UDS10VP and is the answer not in the manual?
Must only be operated by qualified persons. Do not overfill. Surfaces get hot. Keep out of reach of children.
Products designed and manufactured to comply with ACMA specifications regarding Electromagnetic Compatibility.
Mode switch to 'VARIABLE' allows temperature control via graduated knob for special applications.
Mode switch to 'PRESET 95°C' fixes temperature for tea/coffee. Knob does not alter temp in this mode.
See installation. Position urn away from edge. Clean oil residue with soapy water, boil, drain, rinse.
Ensure plug is dry. Fill urn with jug/hose, do not overfill. Urns are heavy when full, do not move when hot.
Internal sensor controls heating. Not suitable for high altitudes (>800m); use Variable mode instead.
Check plug, power switch, circuit breaker, earth leakage device, and thermostat setting.
Adjust thermostat below 100°C for Variable Mode. Use Variable Mode at high altitudes (>800m).