Need help?Do you have a question about the Robe robin 300e wash and is the answer not in the manual?
Covers essential safety measures for electrical shock, handling, and general operation.
Warns against looking directly into the light source, especially for individuals prone to epilepsy.
Details environmental limits, handling procedures, and operational restrictions to prevent damage.
Highlights critical cautions regarding damaged lenses and lamps and their replacement.
Identifies key components of the moving head fixture using labels and diagrams.
Details the rear and front panel connectors, buttons, and the touch screen interface.
Explains how to connect the fixture to the mains power, including fuse replacement.
Provides instructions and safety warnings for installing the lamp, including cooling time.
Guides on adjusting the lamp for optimal light beam performance and hot-spot centering.
Details the process for replacing dichroic colour filters in the fixture's colour wheel.
Instructions for attaching optional top hats to the fixture's lens holder.
Emphasizes safety norms, load capacity, secondary attachments, and professional installation.
Covers fixture placement, fire safety during installation, and secure rigging methods.
Step-by-step guide for attaching the fixture using omega holders and safety ropes.
Explains how to connect the fixture using DMX-512 protocol and building a DMX chain.
Details network connectivity using Art-Net protocol and IP addressing.
Explains lamp operation, cold restrike timing, and automatic re-ignition.
Details the colour wheel, CMY system, and CTO filter for color temperature adjustment.
Covers motorized zoom range and hot-spot adjustment for light intensity control.
Details smooth dimming and strobe effects provided by the mechanical dimmer/shutter unit.
Details DMX/Ethernet addressing, fixture information, user modes, and DMX presets.
Covers pan/tilt controls, blackout functions, screen adjustments, and microphone sensitivity.
Allows manual control, stand-alone operation, program editing, and service functions.
Explains control buttons, touch screen icons, and basic menu navigation.
Provides detailed settings for DMX/Ethernet addressing, fixture information, and user profiles.
Covers manual control, stand-alone modes, service functions like calibration, and software updates.
Details controlling lamp on/off status and setting ignition delays or automatic power management.
Lists supported RDM parameters and commands for remote device management.
Details various error messages like Active Lamp Timer, Lamp Error, Overheated, and sensor errors.
Describes errors related to pan/tilt, colour wheel, lamellas, zoom, and air filter status.
Provides details on power supply, lamp, optical system, and colour mixing.
Lists pan/tilt ranges, electronics features, and supported communication protocols.
Covers rigging points, temperature limits, minimum distances, weight, and physical dimensions.
Lists standard accessories like omega holders and optional accessories such as flash cables and top hats.
Advises on keeping the fixture clean, recommending specific cleaning agents and frequency.
Details cleaning the air filters, including washing or vacuuming, and resetting the elapsed time counter.
Details DMX channels for movement control, speed, time, and special power functions.
Covers DMX channels for colour wheel selection, UV filter, and CMY colour macros.
Explains DMX control for zoom, hot-spot, shutter, strobe effects, and dimmer intensity.
Covers essential safety measures for electrical shock, handling, and general operation.
Warns against looking directly into the light source, especially for individuals prone to epilepsy.
Details environmental limits, handling procedures, and operational restrictions to prevent damage.
Highlights critical cautions regarding damaged lenses and lamps and their replacement.
Identifies key components of the moving head fixture using labels and diagrams.
Details the rear and front panel connectors, buttons, and the touch screen interface.
Explains how to connect the fixture to the mains power, including fuse replacement.
Provides instructions and safety warnings for installing the lamp, including cooling time.
Guides on adjusting the lamp for optimal light beam performance and hot-spot centering.
Details the process for replacing dichroic colour filters in the fixture's colour wheel.
Instructions for attaching optional top hats to the fixture's lens holder.
Emphasizes safety norms, load capacity, secondary attachments, and professional installation.
Covers fixture placement, fire safety during installation, and secure rigging methods.
Step-by-step guide for attaching the fixture using omega holders and safety ropes.
Explains how to connect the fixture using DMX-512 protocol and building a DMX chain.
Details network connectivity using Art-Net protocol and IP addressing.
Explains lamp operation, cold restrike timing, and automatic re-ignition.
Details the colour wheel, CMY system, and CTO filter for color temperature adjustment.
Covers motorized zoom range and hot-spot adjustment for light intensity control.
Details smooth dimming and strobe effects provided by the mechanical dimmer/shutter unit.
Details DMX/Ethernet addressing, fixture information, user modes, and DMX presets.
Covers pan/tilt controls, blackout functions, screen adjustments, and microphone sensitivity.
Allows manual control, stand-alone operation, program editing, and service functions.
Explains control buttons, touch screen icons, and basic menu navigation.
Provides detailed settings for DMX/Ethernet addressing, fixture information, and user profiles.
Covers manual control, stand-alone modes, service functions like calibration, and software updates.
Details controlling lamp on/off status and setting ignition delays or automatic power management.
Lists supported RDM parameters and commands for remote device management.
Details various error messages like Active Lamp Timer, Lamp Error, Overheated, and sensor errors.
Describes errors related to pan/tilt, colour wheel, lamellas, zoom, and air filter status.
Provides details on power supply, lamp, optical system, and colour mixing.
Lists pan/tilt ranges, electronics features, and supported communication protocols.
Covers rigging points, temperature limits, minimum distances, weight, and physical dimensions.
Lists standard accessories like omega holders and optional accessories such as flash cables and top hats.
Advises on keeping the fixture clean, recommending specific cleaning agents and frequency.
Details cleaning the air filters, including washing or vacuuming, and resetting the elapsed time counter.
Details DMX channels for movement control, speed, time, and special power functions.
Covers DMX channels for colour wheel selection, UV filter, and CMY colour macros.
Explains DMX control for zoom, hot-spot, shutter, strobe effects, and dimmer intensity.
General| Brand | Robe |
|---|---|
| Model | robin 300e wash |
| Category | Light Fixture |
| Language | English |
To Next Page
