Roberts Gorden Combat PGP 040 - User Manual

FOR YOUR SAFETY
If you smell gas:
1. Open windows.
2. DO NOT try to light any appliance.
3. DO NOT use electrical switches.
4. DO NOT use any telephone in
your building.
5. Leave the building.
6. Immediately call your local gas
supplier after leaving the building.
Follow the gas suppliers
instructions.
Do not store or use petrol or other
flammable vapours and liquids in the
vicinity of this or any other appli-
ance.
Failure to follow these instructions
can result in death, injury or property
damage.
WARNING
Improper installation, adjustment, alteration,
service or maintenance can result in death, injury
or property damage. Read the Installation,
operation and service manuals thoroughly before
installing or servicing this equipment
Installation must be done by a contractor qualified
in the installation and service of gas/oil fired
heating equipment (whichever is applicable).
Installer
Please take time to read and understand these
instructions prior to any installation. Installer must
give a copyof this manual to the user/owner.
Owner/User
Keep this manual in a safe place close to the heater
to provide your serviceman with information should it
become necessary.
Roberts-Gordon Europe Ltd.
Oxford Street
Bilston, West Midlands WV14 7EG UK
Telephone: +44 (0)1902 494425
Fax: +44 (0)1902 403200
email: uksales@rg-inc.com
www.combat.co.uk
www.rg-inc.com
Combat
®
Warm Air Cabinet
& High-Flow Heaters
OIL FIRED: POP, POPH and
POP /H versions
Models 015 to 0100
GAS FIRED: PGP, PGPH and
PGP /H/M versions
Models 015 to PGP 0100
Installation, Commissioning,
Service & User Instructions
WARNING
Fire Hazard
X523F 02/03
© Copyright 2002 Roberts-Gordon

Summary

FOR YOUR SAFETY

Gas Leak Safety Procedures

Steps to take if you smell gas, including opening windows and evacuating.

Fire Hazard Precautions

Caution against storing flammable liquids near the appliance.

Section 3. Installation Requirements

Regulatory Compliance and Standards

Overview of relevant UK regulations and standards for installing gas and oil heaters.

Heater Siting and Clearances

Guidance on selecting an appropriate installation location for the heater, considering clearances.

Ventilation and Air Supply

Requirements for air supply and ventilation in plant rooms for combustion and heating.

Section 4. Installation Procedures

Electrical Supply and Wiring

Remote Control Integration

Section 4.4 Fuel Oil Supply

Fuel Storage and Pipework

Fuel Supply System Options

Section 4.5 Gas Supply

Gas Supply Installation

Section 5. Commissioning the Heater

Pre-Commissioning Checks

Essential pre-commissioning checks, including electrical tests and safety.

Burner Commissioning Procedures

Steps for commissioning oil and gas fired burners, including settings and tests.

Section 7. Servicing Instructions

Burner and Fan Maintenance

Heat Exchanger and Insulation Servicing

Section 8. Removal & Replacement of Parts

Burner and Fan Component Replacement

Thermostat and Fuse Replacement

Section 9. Fault Finding Charts

General Heater Fault Diagnosis

Flowcharts for diagnosing common operational faults in all heater types.

Burner Specific Fault Finding

Troubleshooting guides for oil and gas burner malfunctions and flame supervision.

Fan and Valve Circuit Faults

Diagnosing issues with main fan circuits and solenoid valve operations.

Section 10. User Instructions

Heater Operation and Controls

Lighting and Shutdown Procedures

Commissioning Data Sheets

Gas Heater Commissioning Record

Roberts Gorden Combat PGP 040 Specifications

General

Brand	Roberts Gorden
Model	Combat PGP 040
Category	Heater
Language	English