Roberts Blutune 100 - Viewing Alarm Settings and Snooze

40
Clock and Alarms
To view the alarm settings
1. Press and hold the Menu button.
2. Press the Tuning Up or Down buttons until 'Set alarm' shows on the
display. Press and release the Select button to enter alarm setup
menu.
3. Press the Tuning Up or Down buttons to display the required alarm,
1 or 2. Press and release the Select button.
4. Press the Tuning Up or Down buttons until 'View' shows on the display.
5. Press and release the Select button to cycle through each of the
settings for the chosen alarm.
Alarm 1
<
>
Alarm 1
<
>
View
Set alarm
<
>
1
2-5
2-4
2-4
Snooze function
1. When the radio, CD or buzzer alarm sounds, pressing any button
other than the On / Standby or Volume buttons will silence the alarm
for 5 minutes. The Snooze symbol (
Z
Z
Z
) will fl ash. This sequence can
be repeated during the 60 minute alarm period.
2. To cancel the Snooze function, press the On / Standby button.
2