Roberts Blutune 100 - Clock Setting; Manual Clock Adjustment

42
Clock and Alarms
Setting the clock manually
Normally your sound system will set its clock automatically using the DAB
radio signal. If no DAB signal is available and you need to set the time
manually, please follow the procedure shown below. The clock may be
set while the unit is in standby mode or while playing.
1. To set the clock time, press and hold the Menu button.
2. Press the Tuning Up or Down buttons until 'Set clock' appears on
the display. Press and release the Select button.
3. Press the Tuning Up or Down buttons until 'Manual' appears on the
display.
4. Press and release the Select button. The hour digits will then fl ash
on the display.
5. Press the Tuning Up or Down buttons to set the desired hour.
6. Press and release the Select button to enter the hour setting. The
minute digits will then fl ash on the display.
7. Press the Tuning Up or Down buttons to set the desired minute.
8. Press and release the Select button. The year will then fl ash on the
display.
1
2-8
2-7
2-7
Set clock
<
>
Set clock
<
>
Manual
Set hour
<
>
09:00
Set mins
<
>
09:00
Set year
<
>
10 MAR 2014