Roberts CR9916 - Alarm Settings; Setting Alarm 1 Time; Setting Alarm 2 Time

Setting alarm times
The alarms can be set to wake you by a buzzer, CD or the radio. Your CD
clock radio has 2 separate alarms which can be set to activate at different
times.
Setting alarm 1
1. Slide the Alarm 1 function switch to the 'Adj' position.
2. Press the Down button to set minutes and the Up button to set the
hour. Release the buttons when the correct time is reached. Alarm 1
time will continue to flash in the display. The clock uses a 12 hour
display with a PM indicator. Ensure that the correct 12 hour cycle is
selected.
3. Return the Alarm 1 function switch to the 'Off' position. The display
will revert to showing time.
Note: Incorrect display will result if both the Alarm function switches
are set to the 'Adj' position.
Setting alarm 2
1. Slide the Alarm 2 function switch to the 'Adj' position. Alarm 2 time
will flash in the display.
2. Press the Down button to set minutes and the Up button to set the
hour. Release the buttons when the correct time is reached. Alarm 2
time will continue to flash in the display. The clock uses a 12 hour
display with a PM indicator. Ensure that the correct 12 hour cycle is
selected.
3. Return the Alarm 2 function switch to the 'Off' position. The display
will revert to showing time
9
1
2
Adj
On
Off
2
Adj
On
Off
Music
Down/
B.skip
Up/
F.skip
1
2
Adj
Adj
On
Off
Down/
B.skip
Up/
F.skip
2
Adj
On
Off
Music