If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Listening to the radio
1. Switch on the radio by pressing the On/Off button.
2. Select the required waveband using the Waveband switch.
3. Tune in to the desired station using the
Tuning control.
4. Adjust volume using the
Volume control.
5. The
Wire aerial located on the rear of your clock radio is for FM
reception. The wire should be fully extended and positioned for optimum
reception.
For MW reception there is a built in ferrite aerial. Rotate your clock
radio to the position giving best reception.
6. To switch off press the On/Off button.
14
1
2
3
4
6
To Next Page
Loading...
