22
System reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Press and hold the Info button until the Advanced DAB or FM menu
shows on the display and then release the Info button.
2. Press and release the Tuning Up or Down buttons until the display
shows 'Factory Reset', then press and release the Select button.
'Press SELECT to confi rm reset...' will show on the display.
3. If you wish to perform the reset operation, press and release the Select
button one more time. A full reset of your radio will be performed. All
presets and station lists will be erased.
4. After a system reset a scan of the DAB band will be performed.
In the event of a malfunction due to electrostatic discharge, mains power
supply transients or short interruptions, reset the product as above to
resume normal operation. If you are not able to perform the reset operation
as above, removal and reconnection of the power supply or batteries may
be required.
If a problem persists please refer to the guarantee section at the back of
this instruction book which explains how to obtain support for your radio.
1
2
2,3
2
DAB
Factory Reset
Press SELECT to
confirm reset...
Welcome to DAB29
To Next Page
Loading...