Robertshaw 9560 User Manual

Application
The Robertshaw 9560 is a multi-stage auto changeover thermostat
designed to control 24 VAC heat pump systems up to 2 stage heat and 2
stage cool. The 9560 requires the use of a common wire.
Features
• Multi-stage control
• Auto changeover [deadband adjustable from 2°F to 8°F (1.0°C - 4.5°C)]
•Large back lit display
• Adjustable 1
ST
and 2
ND
stage temperature differential
• Compressor short cycle protection
• Adjustable fan delay on cooling
• LED indication of system status
• Zone system compatible as a master thermostat
• Battery-free EEPROM memory retention
• Optional temperature limiting settings
• Fahrenheit/Celsius display option
• Adjustable from 45°F to 90°F (7°C - 32°C)
• Quick wire terminal block
1
DELUXE
NON-PROGRAMMABLE
THERMOSTAT
9560
HEAT PUMP
H
®
NeW
2 Heat / 2 Cool
with Auto Changeover
User's Manual
Quick Start
Installation
W
A
R
R
A
N
T
Y
2
T
W
O
Y
E
A
R
110-1033

Robertshaw 9560 Specifications

General

Type	Programmable Thermostat
Temperature Range	45°F to 90°F (7°C to 32°C)
Stages of Heating	1
Display	Digital
Power Source	Battery Powered

Summary

Important Safety Information

Step 1: Replacing Existing Thermostat

Step 2: Installing Model 9560 Thermostat

Step 3: Testing the Thermostat

Step 4: Customizing the Thermostat

Settings

Covers system modes, fan operation, and temperature settings.

Temperature Differential and Deadband

Adjusting temperature differential for stages and auto mode deadband.

LED Indicators

Backlit Display, Emergency Heat, and Reset

Step 5: Troubleshooting

Two Year Limited Warranty