Check
and maintenance works
Reasons
for requiring the maintenance work
Overhaul the
engine.
To
recover
the engine power
and
extend
engine
life.
IO
-
7'
PREPAWATIO
S
FOR
LON6
STORAGE
(1)
Perform the above maintenance works 10
-
1
through 10
-
4.
Also perform 10
-
5
and 10
-
6
as necessary.
(2)
Drain fuel
from
the tank.
(3)
To
protect cylinder bore from rusting, pour a small amount
(4-5
cc) of engine
oil
through the auxiliary fuel inlet into the cylinder and pull the recoil starter slowly
2
to
3
times.
(Do
not start the engine.)
Bo
not
pour too
much
oil
or
the
oil
rernaines in
the
combustion chamber
of
the
piston
1
top.
,
(4)
Pull the recoil starter slowly and stop it at the compression point.
(5)
Clean the engine outside with
a
oily cloth.
(6)
Put a cover over the engine and store it in
a
dry and well ventilated area.
-
66
-
To Next Page
Loading...
