-
19
-
CLEANING AIR CLEANER
A dirty air cleaner element will cause
starting difficulty, power loss, engine
malfunctions, and shorten engine life
extremely.
Always keep the air cleaner element
clean.
1.STD Type
Remove the element and wash it in
kerosene or diesel fuel. Then saturate
it in a mixture of 3 parts kerosene or
diesel fuel and 1 part engine oil.
Squeeze the element to remove the
mixture and install it in the air cleaner.
2.Dual Element Type
●
Urethane Foam cleaning
Clean the urethane foam in the same
way as described above.
●
Second Element
Wash the element in kerosene or
diesel fuel.
Saturate it in a mixture of 3 parts
kerosene or diesel fuel and 1part
engine oil. Shake off excessive oil and
reinstall.
Clean and replace air cleaner
elements more often when operating
in dusty environments.
CLEANING FUEL
STRAINER (NO SMOKING)
●
Inspect fuel strainer for water and dirt.
●
To remove water and dirt, close the
fuel cock and remove the strainer cup.
●
After removing dirt and water, wash the
strainer cup with gasoline.
Reinstall securely to prevent leakage.
STD Type
Dual Element Type
To Next Page
Loading...
Need help?
General
