11. PREPARATIONS FOR STORAGE
-
21
-
ENGINE OIL
● Change the engine oil with fresh oil.
● Remove the spark plug, pour about 5
cc of engine oil into the cylinder,
slowly pull the starter handle of the
recoil starter 2 or 3 times, and
reinstall the spark plug.
CLEAN AND STORE
● Slowly pull the recoil starter handle
until resistance is felt and leave it in
that position.
● Clean the engine thoroughly with an
oiled cloth, put the cover on, and
store the engine indoors in a
wellventilated, low humidity area.
DISCHARGE FUEL
(NO SMOKING !)
● Remove the strainer cup, place the
strainer over a container and open the
strainer cock to discharge fuel from the
fuel tank.
● Remove the carburetor float chamber
bolt from the bottom and discharge
fuel from the carburetor.
To Next Page
Loading...
