ENGLISHENGLISH
-
2
-
PROTECTIVE COVER
●
Place the protective covers over
the rotating parts.
If rotating parts such as the drive shaft,
pulley, belt, etc. are left exposed, they
are potentially hazardous.
To prevent injury, equip them with
protective covers or shrouds.
●
Be careful of hot parts.
The muffler and other engine parts
become very hot while the engine is
running or just after it has stopped.
Operate the engine in a safe area and
keep children away from the running
engine.
●
Never make adjustments on the
machinery while it is connected to the
engine, without first removing the
ignition cable from the spark plug.
Turning the crankshaft by hand during
adjusting or cleaning might start the
engine, and machinery with it, causing
serious injury to the operator.
●
Never run the engine with governor
disconnected, or operate at speeds in
excess of 3600 rpm load.
SURROUNDINGS
●
Operate the engine on a stable, level
surface free of small rocks, loose
gravel, etc
.
●
Operate the engine on a level surface.
If the engine is tilted, fuel spillage
may result.
NOTE
Operating the engine at a steep incline
may cause seizure due to improper
lubrication even with a maximum oil
level.
To Next Page
Loading...
