Robin EHO9-2D - Page 25

– 23 –
2-2-13 IGNITION COIL
Install ignition coil to crankcase.
Pay attention the direction of ignition coil and the
location of code.
Adjust air gap between ignition coil and flywheel
using a thickness gauge and tighten bolts.
M6 x 25 mm bolt and washer : 2 pcs.
Tightening torque
7 - 9 N•m
(70 - 90 kgf•cm)
(5.0 - 6.5 ft•lb.)
Air gap : 0.3 - 0.5 mm
(0.012 - 0.020 in.)
THICKNESS
GAUGE
IGNITION COIL