Robin EH41D User Manual

R
Model
ISSUE EMD-ES1724
EH36/41
Air-cooled, 4-cycle Gasoline Engine

Robin EH41D Specifications

General

Brand	Robin
Model	EH41D
Category	Engine
Language	English

Summary

2. PERFORMANCE

2-1 MAXIMUM OUTPUT

2-2 CONTINUOUS RATED OUTPUT

2-3 MAXIMUM TORQUE

2-4 PERFORMANCE CURVES

Graphical representation of engine output (HP, Torque) versus revolution speed.

5. DISASSEMBLY AND REASSEMBLY

5-1 PREPARATIONS AND SUGGESTIONS

Guidance on procedures and tips for safe and effective disassembly.

5-2 SPECIAL TOOLS

5-3 DISASSEMBLY PROCEDURES

Step-by-step instructions for taking the engine apart.

5-4 REASSEMBLY PROCEDURES

Step-by-step instructions for putting the engine back together.

5-5 BREAK-IN OPERATION

Procedures for breaking in a newly overhauled engine to ensure proper function.

8. CARBURETOR

8-1 OPERATION AND CONSTRUCTION

Details the operation and construction of the carburetor's systems.

8-2 DISASSEMBLY AND REASSEMBLY

Step-by-step procedures for dismantling and reassembling the carburetor.

9. STARTING SYSTEM

9-1 RECOIL STARTER

9-1-1 HOW TO DISASSEMBLE (type D)

9-1-2 HOW TO REASSEMBLE (D-Type)

9-1-3 CHECK AFTER REASSEMBLY

9-2 ELECTRIC STARTER

9-2-1 OPERATION AND FUNCTION

10. TROUBLESHOOTING

10-1 STARTING DIFFICULTIES

Common issues and solutions for engine starting problems.

10-1-1 FUEL SYSTEM

Troubleshooting fuel system issues that prevent engine start.

10-1-2 COMPRESSION SYSTEM

Diagnosing problems related to engine compression.

10-1-3 IGNITION SYSTEM

Troubleshooting ignition system faults affecting engine start.

10-2 ENGINE MISFIRES

Identifying and resolving causes of engine misfires.

10-3 ENGINE STOPS

Causes and solutions for the engine stopping unexpectedly.

10-4 ENGINE OVERHEATS

Troubleshooting causes of engine overheating.

10-5 ENGINE KNOCKS

Identifying and addressing engine knocking issues.

10-6 ENGINE BACKFIRES THROUGH CARBURETOR

Solutions for engine backfiring through the carburetor.

12. SERVICE DATA

12-1 CLEARANCE DATA AND LIMITS

Detailed specifications for various component clearances and tolerances.

12-2 TORQUE SPECIFICATIONS

Recommended torque values for critical fasteners.

12-3 OIL GRADE CHART

13. MAINTENANCE AND STORAGE

13-1 DAILY MAINTENANCE

13-2 INITIAL 20 HRS. MAINTENANCE

13-3 EVERY 50 HRS. (10 DAYS) MAINTENANCE

13-4 EVERY 100-200 HRS. (MONTHLY) MAINTENANCE

13-5 EVERY 500-600 HRS. MAINTENANCE

13-6 EVERY 1000 HRS. (YEARLY) MAINTENANCE

13-7 ENGINE STORAGE