Robin EH25-2D User Manual

Explains warranty coverage for emission components in all states except California.

Specifies the warranty period for emission components starts from the date of sale.

Lists parts covered under the Emission Components Defect Warranty.

Details how to get warranty service from an authorized dealer.

Outlines conditions and situations not covered by the warranty.

Explains user responsibilities for maintaining the emission control system.

Guides users on the process for submitting a warranty claim.

Advises on safe handling of exhaust gases and ventilation.

Provides guidelines for safe refueling procedures to prevent spills and fires.

Outlines measures to prevent fires, including avoiding open flames and flammable materials.

Advises on covering rotating parts to prevent injury from exposed components.

Recommends operating the engine on stable, level surfaces to prevent fuel spillage.

Emphasizes checking fuel hoses and joints for leaks before operation.

Advises checking all bolts and nuts for looseness to prevent engine trouble.

Stresses checking and refilling engine oil and fuel levels as needed.

Recommends wearing snug fitting clothes to avoid entanglement with moving parts.

Details procedures for checking and refilling engine oil, including capacity and types.

Instructs on checking fuel levels and using unleaded gasoline.

Lists necessary parts like a 12V battery and proper cables for electric start.

Provides a table for selecting appropriate wire gauges based on cable length.

Explains the steps for connecting the battery and starter components correctly.

Illustrates the electrical connections for the starter system.

Advises on selecting wire gauges for remote key switch connections.

Outlines the step-by-step process for starting the engine, including controls.

Explains how to use the choke lever for cold or warm engine starts.

Details the correct method for pulling the recoil starter handle.

Guides on setting the speed control lever for engine warm-up after starting.

Explains how to adjust the speed control lever for required engine speed.

Instructs to set the speed control lever to low speed before stopping.

Details using the key switch and stop switch to turn off the engine.

Advises closing the fuel cock as part of the stopping procedure.

Mentions using the recoil starter for stopping, with a note on preventing moist air.

Lists initial checks to perform when the engine fails to start.

Explains how to check for engine compression by testing the starter handle resistance.

Guides on checking the spark plug for wetness to determine fuel supply issues.

Details how to test for a strong spark across the spark plug electrode.

Advises checking the battery charge for electric starter models.

Explains how the oil sensor stops the engine if the oil level is too low.

Provides steps for restarting the engine after refilling oil and checking connections.

Discusses the purpose of the spark arrester and issues with clogging.

Details how to remove, clean, and reinstall the spark arrester screen.

Lists essential checks to perform before each engine start.

Highlights the importance of periodic maintenance for engine efficiency and longevity.

Lists components that are part of the emission control system requiring maintenance.

Specifies tasks to be performed daily, such as cleaning and checking bolts.

Outlines maintenance tasks recommended weekly or monthly.

Details long-term maintenance intervals for major component checks and replacements.

Provides important notes regarding initial oil change and procedures for complex tasks.

Guides on cleaning the spark plug and checking its electrode gap.

Explains the steps for changing engine oil, including initial and subsequent intervals.

Details the process for cleaning the fuel strainer to remove water and dirt.

Explains how to clean air cleaner elements for both STD and Dual Element types.

Advises retightening loose fasteners and replacing damaged parts.

Recommends replacing fuel hoses at specified intervals or if leaks are detected.

Instructs on checking and refilling the battery electrolyte with distilled water.

Guides on how to drain fuel from the tank and carburetor for storage.

Explains adding oil to the cylinder before storage to prevent rust.

Details cleaning the engine and storing it indoors in a suitable environment.