ROBINHOOD Slimline 600 User Manual

WALL MOUNTING
103767 Issue A
ECN:2557
INSTALLATION INSTRUCTION
RANGEHOOD
SIDE WALL MOUNTING
If using Uniduct
cut outside wall
hole
90 x 290mm
600-800mm
For Gas 650-800mm
2.4M
CEILING
HEIGHT
900mm
STOVE
HEIGHT
UNDERCUPBOARD MOUNTING
290
MODEL 900
817
523
MODEL 600
18
For rear
ducting cut hole
to suit duct size.
Dimensions
shown
are for Uniduct
104
732
to
932
900
STOVE
HEIGHT
Underside View of Cupboard
For top ducting cut hole
to suit duct size.
Dimensions shown are
for Uniduct
523 (600)
817 (900)
290
75
95
45
165
Drill
5mm
holes
Wall
SCREW
THROUGH
SIDES USING
HOLE POSITIONS
INDICATED
REMOVE FILTERS
MOUNTING OPTIONS
MOUNTING UNDER
CUPBOARDS
MOUNTING TO REAR WALL
DRILL HOLES AND MOUNT TWO
CUP WASHERS AS SHOWN
REFER WALL MOUNTING DETAIL
IF UNIT COMES WITH
KNOCK-OUT - REMOVE
SWIVEL POWER OUTLET TO TOP
1
2
1
1
2
HOOK RANGEHOOD ONTO CUP
WASHERS, FIX TOP BRACKET
(BRACKET IS PRE-FITTED ON
RANGEHOOD)
INNER CUPBOARD MOUNTED
DRILL FOUR HOLES AT
POSITIONS INDICATED,
REFER UNDER CUPBOARD
MOUNTING
SWIVEL POWER OUTLET TO TOP.
CUT HOLE IN CABINET TO SUIT
SCREW INTO PLASTIC INSERTS
FROM INSIDE CUPBOARD
DOOR EXTENSION
CONCEALS TOP OF
RANGEHOOD
(SL Models Only)
295mm
SL Models Only
72mm
SL Models Only
WALL MOUNTING DETAILS
FOR INSTALLATION OF PLUGS
FOR WALL MOUNTING
1. Mark location of holes as per
installation instructions.
2. Drill 8mm hole.
Note: Do not use a screw driver
to punch a hole in the base
material.
3. Insert Plastic Toggle and tap
with a hammer to ensure it is
flush with the base material.
4. Place supplied screw through
cup washer. Insert into toggle
and tighten.
NOT FOR USE
IN SOLID WALLS
FOR SOLID WALLS
USE APPROPRIATE
WALL PLUGS
Note: Generic model is shown.
Actual product may differ.
250 (SL)
305
598 (600)
892 (900)
PLEASE READ THE ENTIRE INSTRUCTION BEFORE INSTALLING THE RANGEHOOD

ROBINHOOD Slimline 600 Specifications

General

Brand	ROBINHOOD
Model	Slimline 600
Category	Ventilation Hood
Language	English

Summary

Side Wall Mounting

Mounting Options

Mounting to Rear Wall

Details and diagrams for mounting the rangehood to a rear wall.

Mounting Under Cupboards

Instructions and diagrams for mounting the rangehood under a cupboard.

Wall Mounting

Under Cupboard Mounting

Wall Mounting Details

For Wall Mounting Installation

Steps for installing plugs and drilling holes for wall mounting.

Wall Plug Usage Guidance

Instructions for using appropriate wall plugs in solid walls.

Ducting Options

Recirculating Ducting

Information regarding the recirculating ducting method.

Rear Ducted

Information regarding the rear ducted installation method.

Top Ducted Through Roof

Information regarding the top ducted installation method.

Operation and Cleaning

Operation

Steps for operating the rangehood after installation.

Cleaning Instructions

Guidelines for cleaning filters, surfaces, and fan blades.

Lamp Replacement

Procedure for replacing the rangehood lamp.

Parts and Service Information

Contact information for obtaining parts or service.