BLACK KNIGHT 2 - Classic Collection
Installation & Servicing Instructions
PLEASE LEAVE THESE INSTRUCTIONS WITH THE USER
In your own interest and that of safety, it is the law that all gas appliances are installed by competent persons in accordance
with the current Gas Safety (Installation & Use) Regulations.
Failure to install appliances correctly could lead to prosecution.
The installation MUST be in accordance with these installation instructions, all the relevant parts of the Local and National
Building Regulations or Building Standards (Scotland) (Consolidation) Regulations and the relevant recommendations of the
current editions of the following British Standards:-
B.S. 5871 : Part 2.
B.S. 5440 : Parts 1 & 2.
B.S. 6891
B.S. 6461 : Parts 1 & 2.
B.S. 715
B.S. 1251.
Any other relevant British Standard Code of Practice
and/or Local Building Regulations.
This appliance must be installed in accordance with
the rules in force. For G.B. and I.E. only.
1
GENERAL INSTALLATION REQUIREMENTS
IMPORTANT - THIS FIRE DOES NOT NORMALLY REQUIRE ADDITIONAL
VENTILATION INTO THE ROOM IN WHICH IT IS INSTALLED
FOR USE WITH NATURAL GAS ONLY (G20 at 20mbar supply pressure)
The Data Badge and Serial Number are located on the left hand side of the base plate.
Remove the Controls Fender to Gain Access.
SERVICE & INSTALLATION
(GC No. 32 170 16)
To Next Page
Need help?
General
