To Next PageTo Next Page
Need help?Do you have a question about the Robinson Willey firecharm lf and is the answer not in the manual?
General| Brand | Robinson Willey |
|---|---|
| Model | firecharm lf |
| Category | Indoor Fireplace |
| Language | English |
Details on the website's Help Centre for additional information and downloads, available 24 hours.
Overview of legal requirements for gas appliance installation, including relevant British Standards and building regulations.
Details on overall dimensions, heat input/output, burner specifications, settings, and weight of the appliance.
Guidelines for fireplace and surround construction, clearances, and suitability of lightweight surrounds and shelves.
Specifications for hearth construction, dimensions, and clearances required for hearth mounting the appliance.
Requirements for wall mounting, including closure plate spigot opening height and clearance from the fireplace opening.
Inspection criteria for brick chimneys, including sealing, blockages, dampers, ventilation, cross-section, updraught, and effective height.
Specific dimensions for the catchment space behind the closure plate, including spigot clearance and back brick clearance.
Specifications for pre-cast flue installation, including effective height, flueways, and fireplace opening dimensions.
Guidelines for installing the appliance with double-walled or insulated metal box twin-walled flues.
Instructions for unpacking the fire, identifying components, and storing them safely before installation.
Detailed steps for fitting the closure plate, including trimming, air relief opening, and sealing requirements.
Procedure to check for adequate flue pull using a smoke match before proceeding with fire installation.
Steps for preparing the fire, including removing the outer case and control knob, before further installation.
Instructions for fitting the flue spigot and spigot restrictor, including variations for extensions and specific screws.
Guidance on when to use the flue spigot restrictor based on chimney type and height, and when not to use it.
Steps for fitting the gas fire, covering both hearth mounting and wall mounting procedures with specific fixings.
Steps for refitting the burner tray, coal bed, glass door, and outer case after installation.
Essential test to ensure no spillage of combustion products, performed after installation and before user handover.
Key information for the user regarding pilot ignition, heat settings, initial smell, and annual servicing.
Procedure for connecting the fire to the gas supply via the union elbow, ensuring correct orientation and tightening.
Instructions for testing gas soundness, purging, and verifying burner pressure against specifications.
Crucial safety notes before servicing, including turning off gas, testing soundness, and checking for debris.
Detailed steps for removing the front panel, outer case, glass door, and coal bed for servicing or repair.
Procedures for removing and replacing the gas tap and FSD assembly, including spindle extension and connections.
Instructions for replacing injectors and the pilot filter, including specific methods for filter insertion.
Guidance on replacing the pilot assembly and cleaning or replacing the pilot lint filter for ignition issues.
