Robomow RS622 User Manual

40
Robomow S models
Code Description Corrective Action
11 Automatic operation is disabled by Program On/Off menu Enable automatic operation through Program On/Off menu (see
Section 4.3.8).
12 Automatic operation is put on pause by the Power Box Un-pause automatic operation on the Power Box or through the
Program On/Off menu (see Section 5.3).
13 All week days are set as inactive days Validate Inactive Time settings (see Section 4.3.1)
14 The mower is being charged directly by the Power Box (via the
charging adaptor)
Disconnect the mower from the charging adapter (see Section 6.2).
Put the mower in the Base Station.
15 Battery cells are being balanced in special charging mode None. Wait for the end of current charging cycle. May take longer
than usual.
16 The mower is in the Base Station, but there is no charging
voltage supply
Inspect Power Box’s connection to the Base Station. Confirm that
nothing is blocking the charging pins.
17 Low ambience temperature None. The mower will automatically depart when it gets warmer.
18 Sub-Zone entry problem. The mower was unable to enter one of
the Sub-Zones
Refer to “Sub-Zone X Problem“ message in Section 7.2.

Robomow RS622 Specifications

General

Brand	Robomow
Model	RS622
Category	Vacuum Cleaner
Language	English