Need help?Do you have a question about the Robomow RS635 Pro S and is the answer not in the manual?
General| Brand | Robomow |
|---|---|
| Model | RS635 Pro S |
| Category | Lawn Mower |
| Language | English |
Explains warning symbols and their meanings on the mower and in the manual.
Provides detailed safety warnings and essential precautions before and during mower operation.
Crucial safety guidelines and warnings for operating the robotic mower.
Safe practices and procedures for moving the mower within and over long distances.
Safety instructions for using the remote control for manual mowing operations.
Guidelines for handling and charging the mower's battery pack safely.
Essential maintenance procedures and special safety instructions for mower upkeep and servicing.
Information on the proper and environmentally sound disposal of the mower and its components.
Prevents unintended mower operation by locking the keypad.
Secures the mower with a PIN code and activates an alarm if removed.
Details lift, tilt, obstruction sensors, emergency stop, safety switch, and base station interaction.
An introduction to the Robomow robotic mower and its basic operating principles.
Outlines the step-by-step process for installing and setting up the robotic mower.
Lists and describes all the components included in the mower's package.
Planning for wire installation around obstacles and managing slopes.
Initial steps for planning and laying the perimeter wire around the lawn's edge.
Using the RoboRuler to ensure correct spacing between the wire, edge, and obstacles.
Technique for laying wire at corners to ensure smooth mower transitions.
Using Perimeter Islands to safeguard soft obstacles like flower beds and trees.
Instructions for connecting secondary mowing zones to the main area.
Methods for wiring separate lawn areas that are not contiguous.
Joining the two ends of the perimeter wire at the Base Station.
Detailed instructions for assembling and positioning the Base Station.
Guidance on connecting the power supply to the Base Station and mains.
Adjusting cutting height and preparing the mower for its first operation.
Configuring initial settings like language, date, and time.
Verifying the correct placement and functionality of the Base Station.
Ensuring the perimeter wire is correctly laid and detected by the mower.
Instructions for adding and configuring secondary mowing zones.
Securing the perimeter wire with remaining pegs.
Charging the mower fully before its first use.
Identification and function of the mower's external components.
Identification and function of internal components accessible under the mower's hood.
Explanation of the operation panel buttons, LCD display, and their functions.
Interpreting the status lights on the Base Station for troubleshooting and operation.
Configuring lawn parameters and mowing preferences.
Customizing user preferences and mower-specific settings.
Adjusting how often the mower mows and the duration of mowing cycles.
Defining specific days and hours when the mower should not operate.
Temporarily disabling automatic operation for individual lawn zones.
How to adjust the cutting height of the mower using the adjustment knob.
Specific inspection and cleaning tasks to be performed on a monthly basis.
To Next Page
