26 27
• The Perimeter Wire is secured to the ground by the pegs supplied
with the product.
• Pull the wire tight while hammering the pegs to their final depth in
the ground.
• Take care not to
damage irrigation
pipes.
• Place the pegs every few tens of
centimeters.
• Add pegs where necessary to keep
the wire tight to the ground to
avoid damaging it by the mower.
C. Keep laying the wire
Lay the Perimeter Wire loosely along the perimeter as you walk along
the lawn’s edge.
~0.5m
Start unwinding the wire counter clockwise around the lawn
starting at the Base Station’s location.
i
To Next Page
Loading...
