50 51
Stopping an operation
To stop any current operation, press the STOP / button.
Sending the mower to its base
To send the mower to its base, simply press the STOP / button
when the mower is inside the lawn.
If child protection is enabled, see the “Starting mowing operation”
section above to temporarily unlock it. Then press STOP /
button
to send the mower to its base. The child protection will relock
automatically.
Automatic charging
Once a mowing operation is finished, your mower automatically
returns to its base station for charging to be ready for the next
operation.
To Next Page
Loading...
